John Deere 120
Browse All John Deere or Hydraulic Excavator Models
Contents:
Boom/Stick Option (Hex) 1
| Shipping Length Of Unit | 24.87 ft in (7580 mm) |
| Shipping Height Of Unit | 8.8 ft in (2680 mm) |
| Max Cutting Height | 27.67 ft in (8433.82 mm) |
| Max Loading Height | 20.58 ft in (6272.79 mm) |
| Max Reach Along Ground | 26.33 ft in (8025.39 mm) |
| Max Vertical Wall Digging Depth | 16 ft in (4876.8 mm) |
| Max Digging Depth | 17.83 ft in (5434.59 mm) |
| Boom/Stick Option (Hex) 1 | Arm Length 8ft.3in. ( 2.52m |
Boom/Stick Option (Hex) 2
| Shipping Length Of Unit | 24.91 ft in (7590 mm) |
| Max Cutting Height | 28.75 ft in (8763 mm) |
| Shipping Height Of Unit | 8.76 ft in (2670 mm) |
| Max Loading Height | 21.67 ft in (6605.02 mm) |
| Max Reach Along Ground | 27.08 ft in (8253.99 mm) |
| Max Vertical Wall Digging Depth | 17.58 ft in (5358.39 mm) |
| Max Digging Depth | 19.5 ft in (5943.6 mm) |
| Boom/Stick Option (Hex) 2 | Arm Length 9ft. 11in. (3.01m ) |
Dimensions
| Ground Clearance | 1.3 ft in (400 mm) |
| Height To Top Of Cab | 8.93 ft in (2720 mm) |
| Width To Outside Of Tracks | 8.5 ft in (2590 mm) |
| Length Of Track On Ground | 9.45 ft in (2880 mm) |
| Tail Swing Radius | 6.89 ft in (2100 mm) |
| Note | *Typically equipped with push block and ripper. |
| Length Of Machine* | 387 in (9829.8 mm) |
| Maximum Height | 151 in (3835.4 mm) |
| Removal Counterweight Clearance | 2.92 ft in (890 mm) |
| Width | 102 in |
| Width All Wheel Drive (Awd) | 2551 mm |
Undercarriage
| Track Gauge | 6.53 ft in (1990 mm) |
| Shoe Size | 23.63 in (600 mm) |
| Ground Pressure | 4.55 psi (31.38 kPa) |
| Drawbar Pull | 22050 lb (98.09 kN) |
| Number Of Track Rollers Per Side | 7 |
| Number Of Carrier Rollers Per Side | 1 |
| Number Of Shoes Per Side | 44 |
| Max Travel Speed | 3.4 mph (5.48 km/h) |
Engine
| Number Of Cylinders | 6 |
| Engine Make | 2240 |
| Engine Model | 4045T |
| Net Power | 90 hp (67.2 kw) |
| Power Measured @ | 2200 rpm |
| Max Torque | 260 lb ft (352.6 Nm) |
| Aspiration | Turbocharged |
| Displacement | 427.8 cu in (7.1 L) |
| Torque Measured @ | 1400 rpm |
| Bore | 4.1 in (104.2 mm) |
| Stroke | 5.3 in (134.7 mm) |
| Emissions | U.S. EPA Tier 4 Final/EU Stage IV - U.S. EPA Tier 3/EU Stage IIIA |
| Engine Model | Cat 7.1 |
| Note (1) | Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269Standards in effect at the time of manufacture. |
| Note (2) | Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
| Note (3) | Power as declared per ISO 14396 |
| Derating Altitude | 9842.5 ft in (3000 m) |
| Standard Capability | 122 degrees |
| Torque Rise - Iso 9294 | 42% |
| Maximum Torque - Awd On | 611 lb ft (828.5 Nm) |
| All-Wheel Drive Net Power Range (Tier 4) | NaN kW |
| All-Wheel Drive Net Power Range (Tier 3) | 130 hp (97 kw) |
| Derating Altitude (Awd) | 5499 ft in (1676.1 m) |
| Maximum Torque - Iso 9249 | 606 lb ft (821.7 Nm) |
Operational
| Operating Weight | 26790 lb (12151.8 kg) |
| Fuel Capacity | 66 gal (249.9 L) |
| Cooling System Fluid Capacity | 5.9 gal (22 L) |
| Hydraulic System Fluid Capacity | 35 gal (132.5 L) |
| Engine Oil Capacity | 3.5 gal (13 L) |
| Operating Voltage | 24 V |
| Swing Drive Fluid Capacity | 0.8 gal (2.8 L) |
| Alternator Supplied Amperage | 45 amps |
| Hydraulic System Relief Valve Pressure | 4980 psi (34335.9 kPa) |
| Hydraulic Pump Flow Capacity | 26.7 gal/min (101.1 L/min) |
Swing Mechanism
| Swing Speed | 12.7 rpm |
| Swing Torque | 22415 lb ft (30390.7 Nm) |
Buckets
| Reference Bucket Capacity | 1.1 yd3 (0.8 m3) |
Moldboard
| Cutting Edge | 6 in (152.4 mm) |
| Blade Width | 12 ft in (3.7 m) |
| Arc Radius | 16.3 in (414.1 mm) |
| Throat Clearance | 4.1 in (104.2 mm) |
| End Bit | 6 in |
| Blade Height | 24 in (609.6 mm) |
Service Refill Capacities
| Cooling System | 14 gal (53 L) |
| Fuel Tank | 65 gal (246.1 L) |
| Engine Crankcase | 4.8 gal (18.2 L) |
| Hydraulic System | 25.6 gal (97 L) |
| Diesel Exhaust Fluid Tank (Tier 4 Only) | 5 gal (19 L) |
| Transmission And Differential | 9 gal (34.1 L) |
| Circle Drive | 1.8 gal (6.9 L) |
Machine Weight
| Note (1) | *Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids. |
| Lever/Steering Wheel Weight* Tier 4 | 35.1 lb (16 kg) |
| Joystick Weight* Tier 4 | 35.4 lb (16.1 kg) |
| Lever/Steering Wheel All-Wheel Drive (Awd) Weight* Tier 4 | 36.8 lb (16.7 kg) |
| Joystick All-Wheel Drive (Awd) Weight* Tier 4 | 36.9 lb (16.8 kg) |
| Lever/Steering Wheel Weight* Tier 3 | 34.7 lb (15.7 kg) |
| Joystick Weight* Tier 3 | 34.9 lb (15.9 kg) |
| Lever/Steering Wheel All-Wheel Drive (Awd) Weight* Tier 3 | 36.3 lb (16.5 kg) |
| Joystick All-Wheel Drive (Awd) Weight* Tier 3 | 36.4 lb (16.5 kg) |
Blade Range
| Maximum Lift Above Ground | 16.1 in (409 mm) |
| Maximum Depth Of Cut | 30.5 in (774.7 mm) |
| Maximum Shoulder Reach Left | 69.4 in (1762.8 mm) |
| Maximum Shoulder Reach Right | 76 in (1930.4 mm) |
| Moldboard Side Shift Left | 20.1 in (510.6 mm) |
| Moldboard Side Shift Right | 26.1 in (663 mm) |
| Circle Center Shift Left | 26 in (660.4 mm) |
| Circle Center Shift Right | 26 in (660.4 mm) |
| Blade Tip Range Forward | 40 |
| Blade Tip Range Backward | 5 |
