Hyster S55FTS
Contents:
Dimensions
| Length To Fork Face | 7.31 ft in (2228 mm) |
| Overall Width | 3.64 ft in (1108 mm) |
| Overall Height - Mast Lowered | 7.01 ft in (2135 mm) |
| Wheelbase | 4.7 ft in (1430 mm) |
| Ground Clearance | 4.93 in (125 mm) |
| Height To Top Of Overhead Guard | 6.99 ft in (2128 mm) |
| Max Fork Height | 10.81 ft in (3292 mm) |
| Gradeability | 31 % |
| Right Angle Stack | 7.64 ft in (2327 mm) |
| Turning Radius | 6.36 ft in (1937 mm) |
Mast
| Mast Tip Forward | 5 degrees |
| Mast Tip Rear | 5 degrees |
| Lower Speed | 114 ft/min (34.75 m/min) |
| Load Center | 24 in (609.6 mm) |
| Load Capacity | 5500 lb (2494.76 kg) |
| Lift Speed | 124 ft/min (37.8 m/min) |
Engine
| Number Of Cylinders | 4 |
| Engine Make | 2357 |
| Engine Model | PSI 2.4L |
| Power | 59 hp (44 kw) |
| Torque | 121 lb ft (164.1 Nm) |
| Power Measured @ | 2700 rpm |
| Displacement | 143 cu in (2.4 L) |
| Torque Measured @ | 2000 rpm |
| Fuel Type | LP/Gas |
Operational
| Operating Weight | 9114 lb (4134 kg) |
| Tire Type | Cushion |
| Number Of Front Wheels | 2 |
| Number Of Rear Wheels | 2 |
| Max Speed | 11.3 mph (18.2 km/h) |
| Drawbar Pull | 5260 lb (2385.9 kg) |
| Fuel Capacity | 10.7 gal (40.6 L) |
| Front Tire Size | 21 X 8 x 15 |
| Rear Tire Size | 16 x 6 x 10.5 |
| Hydraulic System Relief Valve Pressure | 2250 psi (15513.2 kPa) |
| Hydraulic Tank | 9.5 gal (36 L) |
| Axle Load - Front | 3454 lb (1566.8 kg) |
| Axle Load - Rear | 5659 lb (2566.9 kg) |
