| Track Gauge | 6.21 ft in (1890 mm) |
| Note (2) | All dimensions with SystemOne undercarriage. |
| Number Of Shoes Per Side | 40 |
| Number Of Track Rollers Per Side | 7 |
| Shoe Width - Lgp | 33.1 in (840.74 mm) |
| Shoe Width - Xl | 24 in (609.6 mm) |
| Shoe Width - Xl - Fine Grading | 24 in (609.6 mm) |
| Shoes/Side - Lgp | 46 |
| Shoes/Side - Xl | 40 |
| Shoes/Side - Xl - Fine Grading | 46 |
| Track Gauge - Lgp | 85 in (2159 mm) |
| Track Gauge - Xl | 74.41 in (1889.76 mm) |
| Track Gauge - Xl - Fine Grading | 74.41 in (1889.76 mm) |
| Track On Ground - Lgp | 122.4 in (3108.96 mm) |
| Track On Ground - Xl | 102.6 in (2606.04 mm) |
| Track On Ground - Xl - Fine Grading | 122.4 in (3108.96 mm) |
| Track Rollers/Side - Lgp | 8 |
| Track Rollers/Side - Xl | 7 |
| Track Rollers/Side - Xl - Fine Grading | 8 |
| Ground Contact Area | 4822 in2 (3.12 m2) |
| Ground Contact Area* - Lgp | 8928 in2 (5.76 m2) |
| Ground Contact Area* - Xl | 5518 in2 (3.56 m2) |
| Ground Contact Area* - Xl - Fine Grading | 6479 in2 (4.18 m2) |
| Ground Pressure | 7.24 psi (49.92 kPa) |
| Ground Pressure - Lgp* | 4.5 psi |
| Ground Pressure - Xl* | 6.7 psi |
| Ground Pressure* - Xl - Fine Grading | 5.8 psi |
| Grouser Height - Lgp | 2.21 in (55.88 mm) |
| Grouser Height - Xl | 2.6 in (66.05 mm) |
| Grouser Height - Xl - Fine Grading | 2.6 in (66.05 mm) |
| Note (1) | *ISO 16754 |
| Beam Cross Section | 216 mm 254 mm (8.5 in 10.0 in) |
| Number Of Pockets | 3 |
| Maximum Penetration - Xl | 20.2 in (513.1 mm) |
| Maximum Penetration - Lgp | 15.6 in (396.3 mm) |
| Ripper Type | Fixed Parallelogram |
| Pocket Spacing | 3.3 ft in (1.1 m) |
| Shank Gauge | 6.6 ft in (2.1 m) |
| Shank Section | 73 mm 176 mm (2.9 in 6.9 in) |
| Maximum Clearance Raised - Shank Tip | 24.5 in (622.3 mm) |
| Maximum Penetration Force - Xl | 11600 lb ft (15727.5 Nm) |
| Maximum Pry-Out Force - Xl | 47480 lb ft (64374.3 Nm) |
| Maximum Penetration Force - Lgp | 9667 lb ft (13106.7 Nm) |
| Maximum Pry-Out Force - Lgp | 38217 lb ft (51815.3 Nm) |
| Each Additional Shank | 172 lb (78.1 kg) |
| Weight - With Three Shanks | 3444 lb (1562.2 kg) |
| Overall Beam Width | 86.7 in (2202.2 mm) |
| Engine Make | 2236 |
| Engine Model | 3126 DITAAC |
| Net Power | 145 hp (108.2 kw) |
| Displacement | 433 cu in (7.1 L) |
| Bore | 4.1 in (104.2 mm) |
| Stroke | 5.3 in (134.7 mm) |
| Emissions | U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 Final |
| Engine Model | Cat C7.1 ACERT |
| Flywheel Power | 166 hp (123.8 kw) |
| Note (1) | Net power advertised is the power available at the engine flywheel when the engine is equipped with the air cleaner, muffler, alternator, cooling fan at maximum speed. |
| Note (2) | No derating required up to 3000 m (9,840 ft) altitude, beyond 3000 m (9,840 ft) automatic derating occurs. |
| Note (3) | All non-road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations. |
| Note (4) | Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. |
| Net Power - 1,800 Rpm - Iso 9249/Sae J1349 (Din) | 168 hp (125.3 kw) |
| Net Power - 1,800 Rpm - Iso 9249/Sae J1349 | 166 hp (123.8 kw) |
| Engine Power - Maximum - At 2,200 Rpm - Sae J1995 | 182 hp (135.8 kw) |
| Engine Power - Maximum - At 2,200 Rpm - Iso 14396 | 178 hp (132.8 kw) |
| Engine Power - Maximum - At 2,200 Rpm - Iso 14396 (Din) | 180 hp (134.3 kw) |
| Operating Weight | 36943 lb (16757.1 kg) |
| Note (1) | Operating Weight: Includes EROPS, A/C, lights, VPAT dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 100% fuel, and Cat Comfort Series Air Suspension Seat and operator. |
| Note (2) | Shipping Weight: Includes EROPS, A/C, lights, VPAT dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 5% fuel, and Cat Comfort Series Air Suspension Seat. |
| Operating Weight - Lgp | 40446 lb (18346 kg) |
| Shipping Weight - Lgp | 39339 lb (17843.9 kg) |
| Operating Weight - Xl Waste Handler | 40818 lb (18514.8 kg) |
| Operating Weight - Lgp Waste Handler | 44749 lb (20297.9 kg) |
| Shipping Weight - Xl Waste Handler | 40029 lb (18156.9 kg) |
| Shipping Weight - Lgp Waste Handler | 43642 lb (19795.7 kg) |
| Shipping Weight - Xl | 36153 lb (16398.8 kg) |
| Operating Weight - Xl | 36943 lb (16757.1 kg) |
| Xl Vpat Blade | 2341 lb (1061.9 kg) |
| Lgp Vpat - Blade | 2720 lb (1233.8 kg) |
| Xl Vpat Foldable | 2762 lb (1252.9 kg) |
| Lgp Vpat - Foldable | 3287 lb (1491 kg) |
| Xl Su - Blade | 5732 lb (2600 kg) |
| Xl Vpat Landfill | 2912 lb (1320.9 kg) |
| Multi-Shank Ripper - With 3 Shanks | 2959 lb (1342.2 kg) |
| Lgp Vpat - Landfill | 3166 lb (1436.1 kg) |
| Operating Weight - Xl Fine Grading | 38162 lb (17310 kg) |
| Shipping Weight - Xl Fine Grading | 37373 lb (16952.2 kg) |
| Sound Level Information (1) | The operator Equivalent Sound Pressure Level (Leq) is 81.5 dB(A) when ANSI/SAE J1166 FEB2008 is used to measure the value for an enclosed cab. The measurement was conducted at 100% of the maximum engine cooling fan speed. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with the cab doors and the cab windows closed. |
| Sound Level Information (2) | Hearing protection may be needed when the machine is operated with an open operator station for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained, or when the doors and windows are open for extended periods or in a noisy environment. |
| Sound Level Information (3) | The average exterior sound pressure level is 85.5 dB(A) when the SAE J88 FEB2006 Constant Speed Moving Test procedure is used to measure the value for the standard machine. The measurement was conducted under the following conditions: distance of 15 m (49.2 ft) and the machine moving forward in an intermediate gear ratio. |
| Specification Name Too Long | If equipped, the certification label 110 dB(A) is used to verify the environmental sound certification of the machine to the requirements of the European Union. The value that is listed on the label indicates the guaranteed exterior sound power level (LWA) at the time of manufacture for the conditions that are specified in 2000/14/EC. Your machine may have a different value. |
| Sound Levels - Average Exterior Sound Pressure Level - Sae J88:2006 | 85.5 dB(A) |
| Sound Levels - Dynamic Operator Sound Pressure Level (Lpa) - Iso 6396:2008 | 76 dB(A) |
| Sound Levels - Maximum Sound Power Level - 2000/14/Ec | 110 dB(A) |
| Vibration Levels - Maximum Hand/Arm* - Iso 5349:2001 | 2.5 m/s2 (8.2 ft/s2) |
| Vibration Levels - Maximum Whole Body* - Iso/Tr25398:2006 | 0.5 m/s2 (1.6 ft/s2) |
| Vibration Levels - Seat Transmissibility Factor - Iso 7096:2000 - Spectral Class Em6 | Less Than 0.7 |
| Note | *Values are for an experienced operator in a dozing application, consult the Operating and Maintenance Manual for details. |
| Flange Diameter | 19.8 in (503 mm) |
| Oil Capacity | 19.6 gal (74.1 L) |
| Winch Model | PA55 |
| Winch And Bracket Length | 45.1 in (1145.6 mm) |
| Drum Capacity - 22 Mm (0.88 In) | 288.8 ft in (88.1 m) |
| Winch Drive | Mechanical |
| Control | Electric |
| Overall Width | 38.4 in (975.4 mm) |
| Drum Diameter | 10 in (254 mm) |
| Drum Width | 12.4 in (315 mm) |
| Rope Diameter - Recommended | 0.9 in (22.3 mm) |
| Cable Ferrule Size - O.D. Length | 54 mm 67 mm (2.13 in 2.63 in) |
| Maximum Bare Drum - Line Speed | 141 ft/min |
| Maximum Full Drum - Line Speed | 217 ft/min |
| Maximum Bare Drum - Line Pull* | 69200 lb (31388.6 kg) |
| Maximum Full Drum - Line Pull* | 44410 lb (20144.1 kg) |
| Winch Case - Width | 38.4 in (975.4 mm) |
| Weight* | 2814 lb (1276.5 kg) |
| Note (1) | *Weight: Includes pump, operator controls, oil, mounting brackets and spacers. |
| Note (2) | Slow and standard speed winches are available. |
