Caterpillar 963D
Browse All Caterpillar or Crawler Loader Models
Contents:
Dimensions
| Length With Bucket On Ground | 21.51 ft in (6584 mm) |
| Ground Clearance | 1.54 ft in (471 mm) |
| Width To Outside Of Tracks | 7.48 ft in (2280 mm) |
| Height To Top Of Cab | 10.94 ft in (3335 mm) |
| Clearance At Full Height And Dump | 10.35 ft in (3155 mm) |
| Reach At Dump Height | 3.81 ft in (1160 mm) |
| Length To Front Of Track | 15.58 ft in (4749 mm) |
Ripper Specifications
| Ground Clearance | 34.4 in (873.76 mm) |
| Cylinders - Bore | 4.49 in (114.05 mm) |
| Cylinders - Stroke | 11.3 in (287.02 mm) |
| Addition To Machine Length Due To Ripper In Transportation Position | 19.4 in (492.76 mm) |
| Number Of Pockets | 3 |
| Overall Width/Beam | 76.7 in (1948.18 mm) |
| Penetration | 10.6 in (269.24 mm) |
| Shank Cross Section | 58.5 mm x 138 mm 50 in x 5.4 in |
| Ripping Width | 72.3 in (1836.42 mm) |
| Type | Radial |
Undercarriage
| Track Gauge | 72.8 in (1849.12 mm) |
| Length Of Track On Ground | 8.33 ft in (2542 mm) |
| Number Of Shoes - Each Side | 38 |
| Number Of Shoes Per Side | 38 |
| Number Of Track Rollers Per Side | 7 |
| Track Shoe Type | Double Grouser |
| Track Shoe Width | 21.5 in (550 mm) |
| Ground Contact Area | 4340 in2 (2.8 m2) |
| Track Shoe Width - Optional | 17.7 in (449.58 mm) |
| Track Shoe Width - Standard | 21.6 in (548.64 mm) |
| Ground Pressure | 10.3 psi (70.91 kPa) |
| Ground Pressure - Optional Shoe | 12.4 psi |
| Ground Pressure - Standard Shoe | 10.3 psi |
| Grouser Height - Double Grouser | 1.65 in (41.91 mm) |
| Ground Contact Area - Standard Shoe | 4340 in2 (2.8 m2) |
| Track On Ground | 100.1 in (2542.54 mm) |
| Ground Contact Area - Optional Shoe | 3565 in2 (2.3 m2) |
| Track Rollers - Each Side | 7 |
Engine
| Number Of Cylinders | 6 |
| Engine Make | 2236 |
| Engine Model | C6.6 ACERT |
| Net Power | 189 hp (141 kw) |
| Power Measured @ | 2000 rpm |
| Displacement | 402.8 cu in (6.7 L) |
| Bore | 4.2 in (105 mm) |
| Stroke | 5 in (127 mm) |
| Net Power - Cat | 189 hp (141 kw) |
| Net Power - Iso 9249 | 189 hp (141 kw) |
| Net Power - Sae J1349 | 189 hp (141 kw) |
| Engine Model | Cat C6.6 ACERT |
| Flywheel Power | 189 hp (141 kw) |
| Net Power - Eec 80/1269 | 189 hp (141 kw) |
Operational
| Operating Weight | 44577 lb (20220 kg) |
| Fuel Capacity | 105.6 gal (400 L) |
| Cooling System Fluid Capacity | 8.3 gal (31.5 L) |
| Engine Oil Capacity | 4.4 gal (16.5 L) |
| Final Drive Fluid Capacity - Each | 4 gal (15 L) |
| Hydraulic System Fluid Capacity | 23.7 gal (90 L) |
| Static Tipping Load | 33001 lb (14969 kg) |
| Breakout Force - Std Bucket | 46908 lb (208.7 kN) |
| Bucket Capacity - Struck | 2.7 yd3 (2 m3) |
| Bucket Capacity - Heaped | 3 yd3 (2.3 m3) |
| Operating Voltage | 24 V |
| Max Speed | 6 mph (9.5 km/h) |
Weights
| Operating Weight | 44577 lb (20219.8 kg) |
Buckets
| Capacity - General Purpose | 3.2 yd3 (2.5 m3) |
| Bucket Width - General Purpose | 102.8 in (2611.2 mm) |
| Capacity - Multi-Purpose | 2.6 yd3 (2 m3) |
| Bucket Width - Multi-Purpose | 101.3 in (2573.1 mm) |
Hydraulic
| Pump Type | Closed center, load sensing/piston |
| Pump Flow Capacity | 55.2 gal/min (209 L/min) |
| Relief Valve Pressure | 3989 psi (27500 kPa) |
| Raise Time | 5.7 sec |
| Dump Time | 1.3 sec |
| Lower Time | 3.7 sec |
Service Refill Capacities
| Cooling System | 8.3 gal (31.5 L) |
| Fuel Tank | 105.6 gal (399.8 L) |
| Final Drive - Each | 4 gal (15.2 L) |
| Hydraulic Tank | 23.7 gal (89.8 L) |
| Crankcase - With Filter | 4.4 gal (16.7 L) |
| Pivot Shaft | 0.5 gal (1.9 L) |
Standards
| Brakes | Brakes |
| Rops/Fops | ROPS/FOPS |
| Cab | Cab |
Bucket Cycle Times
| Cycle Time - Dump | 1.3 s |
| Cycle Time - Float Down | 2.9 s |
| Cycle Time - Raise | 5.8 s |
| Cycle Time - Total | 6.4 s |
Drive System
| Track Motor | Two, variable displacement, bent axis motors |
Hydraulic System - Equipment
| Hydraulic System - Equipment Type | Closed center, load sensing / piston |
| Main Relief Valve Setting | 4061 psi |
| Output | 55.2 gal/min |
